Aavik C-150 Preamplifier







AAVIK C-150 PREAMPLIFIER


In standard configuration the Aavik C-150 prelifier have three line inputs. You have the option of adding a DAC section (PCM-DSD) and/or a MC-phono stage to the mix.

The Aavik 150 series is developed on all the experiences gained by the development and production of the highly praised Aavik 300 series and as thus, it carries most of the Sonic DNA from its famous larger siblings.

The sleek and sporty exterior design of both models gives you very simple and intuitive controls and a clear and easy to see dot-matrix display – everything straight forward to operate.






aavik_c150_back.jpg




In the section below you can see the specifications for Aavik C-150 preamplifier. Should you have any additional questions, then you are always welcome to contact us.















Output:

  1. 2 pairs of RCA outputs

  2. Max output: 7.5Vrms

  3. Distortion, line stage: <0.005% (THD at 1kHz, 1V input)

  4. Output impedance: 50 ohms Phono:

  5. Floating RCA input (1 set)

  6. Load resistance adjustable from 50 ohm to 10 kohm

  7. Frequency response +/-0.5dB (20Hz-20kHz)

  8. Noise -90dB re 2V out

  9. Distortion <0.02% (20Hz-20kHz)

  10. RIAA correction curve

  11. Gain: 65-75dB adjustable in 2dB steps Line:

  12. 3 inputs

  13. Input impedance: 10kOhm

  14. Default gain: 9dB

  15. Gain (input 1 and 2): 5-15dB adjustable in 2dB steps

  16. Gain (input 3): 1-11dB adjustable in 2dB steps Digital:

  17. 2 RCA S/P-DIF inputs (32-192kHz, 24 bits)

  18. 2 TOSLINK S/P-DIF inputs (32-96kHz, 24 bits)

  19. USB galvanically isolated, UAC2, asynchronous (PCM 32-196kHz,24 bits, DSD64 and DSD128) Volume control:

  20. 80 1dB steps Power consumption:

  21. Standby: <0.5W

  22. On: <20W Dimensions:

  23. 88 x 440 x 370 mm Weight:

  24. 14,0 kg