top of page

ZYX Premium Airy 3S Moving Coil MC Cartridge *very good condition*

SGD2,000

*Original price SGD4,500
*Very good condition
*Usage 500 hours approximately

Product Description

Simply the most refined cartridge in the range for exrtra performance, this is the ZYX Premium Airy 3 moving coil mc cartridge but with the body stripped away. This slightly reduces resonance and hence increases performance.
The “Premium” series cartridges are equipped with a new “Balanced type eddy current elimination mechanism” which we developed to solve this problem, and succeeded to reproduce an accurate time axis of the sound signal by non-magnetic impedance.
The new material which was not thought about in the past are developed one after another. One of them is a thin and tough material while being flexible. The suspension wire of MC cartridge is to hold and position the fulcrum of the rotary vibration of the cantilever, and a hard metal wire like piano wire has been commonly used conventionally.
Instead of a hard metal wire, we employed in Premium series new optimal material without aging, tough and of superior temperature characteristics. This brought an improvement in tracking ability and a sense of pitch that soaks into a soul. As a result, the true analog sound of Premium series was further improved in the sense of reality.

The AIRY 3 series uses an ideal Boron Solid Cantilever, which creates a cantilever of the lowest mass, the highest rigidity and the fastest response to the most dynamic.

Specifications

*Type: Moving Coil (Dynamic)
“REAL STEREO” Generator System
*Cryogenic Treatment: Temperature: -196 ℃ (-320°F)
*Output Voltage: 0.24mV (3.54cm/sec, 1kHz)
*Frequency Response ±1dB: 10 Hz - 100 kHz : 20 Hz - 20 kHz
*Channel Separation: > 30dB 〔 1kHz 〕
*Channel Balance: < 0.5dB 〔 1kHz 〕
*Recommended Tracking Force: 2.0gm 〔 20 ゜C-25 ゜C 〕
*Tracking Force Range: 1.7gm - 2.5gm
*Trackablity: > 60μm
*EQ Compliance: horizontal 15×10-6cm/dyne : Vertical 12×10-6cm/dyne
*Internal Impedance: 4.0 Ω
*Load Impedance: > 100Ω
*Coil Wire: S type 5N Silver φ 0.035mm/CRYO
*Cantilever Material: Boron solid φ 0.30mm
*Stylus: Micro-Ridge Solid Diamond 0.07mm
*Contact Radius, Life Time: 3μm×60μm, 2000Hour/2.0gm
*Output Terminals: φ1.25mm gold plated 〔 EIA 〕
*Terminal Board: Glass Epoxy Plate
*Dimensions: W (Width) : 16.3mm
L (Length) Body / with Terminals : 19.6mm / 23.5mm
H (Height) : 15.5mm
Net Weight: 5.0gm, 7.7gm(TB), 9.5gm(SB attached)

Return & Refund Policy

• All Pre-Owned items have been tested before listing.
• NO WARRANTY.
• We encourage buyers to test and verify the equipment condition at our showroom (1 Coleman Street, The Adelphi, Unit 03-35) — pre-owned condition as shown on our listed page.

bottom of page