The electrical mains
power supply is the “fuel” that feeds every audio or visual
system. If this “fuel” is degraded along the way, it will
not perform to the very best of its ability. One of, if not the weakest
link in the audio/visual chain is the fuse. Without doubt, it will
degrade the electricity as it passes through.
The AMR Gold Fuse is
a reference replacement fuse for all electronic products. Audio and
visual products from amplifiers to LCD televisions will attain a
higher level of performance as the power supply chain is no longer “degraded” by
running the electricity through a compromised, mass produced fuse.
The generic fuse is an industrial-grade item produced for one job
only: to act as a safety cut-out by melting once the electrical current
passing through exceeds stated parameters. Its remit has no consideration
for the needs of an audio/visual component/system.
Industrial-grade
fuses are typically made from:
- Low-grade tin/metal spiral wire: microphonics,
added inductance and power degradation issues
- Thin glass tube body:
microphonic issues
- Low-grade metal end caps: poor contact, power
degradation issues
The AMR Gold Fuse was developed after lengthy
testing and auditioning and is a true reference-class mains fuse.
To an audio system (CD Processors, Amplifiers, Turntables etc…), the AMR Gold Fuse has been found
to bring the following improvements:
- Fuller body, better definition
and detail
- Reduced distortion
- Extended dynamic range
For visual
equipment (plasma, LCD televisions, projectors, BD and DVD players
etc…),
the AMR Gold Fuse has been found to raise the level of performance
with:
- Sharper picture definition
- Richer colours and blacker blacks
- Much reduced picture “noise”
With AMR’s awareness
and understanding of the limiting factor of the generic fuse, AMR has
designed and developed the AMR Gold Fuse which addresses each of the
above issues to result in a whole that is truly greater than the sum
of the parts.
|
