Mark Levinson No.326S Stereo Preamplifier*Good condition*

SOLD

*Original price SGD11,000
*Excellent condition.
*No box.

Product Description

Following in the Mark Levinson tradition, the N°326S exceeds all reasonable expectations for a stereo preamplifier. Its flexible design accommodates a wide range of demands, and shielded audio circuits produce an incomparable sound fit for sophisticated music reproduction systems.

Nº326S Highlights:
-Nelco N4000-13 SI main circuit board
-Aux output path: 1 XLR and 1 RCA stereo pairs w/ fixed/variable volume and independent source selection.
-Independent audio circuits, communication circuits and power supplies for each channel
-Seven configurable inputs including four single-ended (RCA) inputs and three balanced (XLR) inputs
-Main outputs: 2 XLR and 2 RCA stereo pairs (identical w/ volume).
-Ethernet, RS-232, IR and 12V trigger system control ports. Includes system remote control.
-Separate main and record outputs
-Complete surround-sound-processor integration

https://www.stereophile.com/solidpreamps/106ml/index.html
https://hometheaterhifi.com/volume_13_3/mark-levinson-326s-preamplifier-7-2006-part-1.html

Specifications

Description: Unless otherwise specified, these specifications indicate nominal values measured over a 20Hz to 20kHz bandwidth through balanced (XLR) connections.
-Frequency Response: 10 to 40kHz, ±0.2 dB
-Input Impedance: 100kΩ
-Height: 2.92” (74.04mm)
-Width: 17.75” (450.85mm)
-Depth: 13.58” (344.91mm)
-Weight: 30lb (14kg)
-Communication and Control: 2 8-pin RJ-45 connectors for Link communication; 1 6-pin modular RJ-11 connector for RS-232 communication; 1 3.5mm mini-jack for trigger output; 1 3.5mm mini-jack for ir input
-Analog Audio Inputs: 3 balanced (female XLR) stereo inputs; 4 single-ended (Mark Levinson-RCA) stereo inputs
-Analog Audio Outputs: 1 balanced (male XLR) stereo main output; 1 single-ended (Mark Levinson-RCA) stereo main output; 2 single-ended (Mark Levinson-RCA) stereo record outputs
-Total Harmonic Distortion (THD): 0.001%
-Crosstalk: -94dBV, 20Hz to 20KHz input terminated
-Gain: 0, 6, 12, or 18dB line-level stage
-Output Impedance: < 50kΩ
Power Requirements: 220, or 230V AC power at 50 or 60Hz (preset)

Return & Refund Policy

• All Pre-Owned items have been tested before listing.
• NO WARRANTY.
• We encourage buyers to test and verify the equipment condition at our showroom (1 Coleman Street, The Adelphi, Unit 03-35) — pre-owned condition as shown on our listed page.